Converters & Adapters

Fix your rack compatibility issues 

Need to fit square pegs in round holes? How about full sized servers in 2 post racks? Maybe adjust your mounting depth or rack width? At RackSolutions, you’ll find some of the most configurable rackmount products in existence. And if you can’t find the exact one you need, just ask.

View as Grid List

1-10 out of 10 results found

per page
Set Descending Direction
  1. (2) 2.70" brackets with 4 bends
    2U Adapter Bracket Assortment for 4U - 7U
    SKU: 2UKIT-102
    0% (0)
    $149.99
    4U - 7U Adapter Bracket Set
    2U Adapter Bracket Assortment for 4U - 7U
  2. 2U, 2Post Conversion Kit (2POST-2UKIT)
    1U-7U Conversion Bracket 4-Pack (3in Uprights)
    0% (0)
    As low as $129.99
    Mount 4Post equipment
    in 2Post racks
    1U-7U Conversion Bracket 4-Pack (3in Uprights)
  3. 2U, 23" to 19" Joggled Reducer Brackets (pair) (2UBRK-23J-PAIR) Installed
    2U Joggled Reducer Brackets 2-Pack
    0% (0)
    As low as $19.99
    Allows 19" equipment to
    fit 23 - 24" racks
    2U Joggled Reducer Brackets 2-Pack
  4. 4U Adapter Brackets - 5" (4UKIT-101-CG001)
    2U-4U 5in Adapter Bracket Set 2-Pack
    0% (0)
    As low as $59.99
    5" Adapter Bracket Set
    2U or 4U
    2U-4U 5in Adapter Bracket Set 2-Pack
  5. 2UBRK-270-FULL - 2U Adapter Brackets
    2U Adapter Brackets
    0% (0)
    As low as $15.99
    2U Adapter Brackets
    .59" - 3.5" Wide
    2U Adapter Brackets
  6. 1UBRK-270 - 1U Adapter Brackets
    1U Adapter Brackets
    0% (0)
    As low as $15.99
    1U Adapter Brackets
    .59" - 3.5" Wide
    1U Adapter Brackets
  7. Front view - 4U Flushmount Conversion Kit
    4U Flush Mount Conversion Bracket 2-Pack (26in Deep) with 2U Adapter Brackets 4-Pack (2 bends, 0.59in Deep)
    SKU: 4UKIT-003
    0% (0)
    $199.99
    Flush mount a server in a 2Post rack
    Conversion Kit for 19" 2Post racks
    4U Flush Mount Conversion Bracket 2-Pack (26in Deep) with 2U Adapter Brackets 4-Pack (2 bends, 0.59in Deep)
  8. 1U Adapter Kit - contains 10 brackets (2 of each shown)
    1U Adapter Bracket Assortment
    SKU: 1UKIT-106
    0% (0)
    $119.99
    Adjust the server rack mounting depth
    10 Bracket Assortment
    1U Adapter Bracket Assortment
  9. 2U Adapter Bracket Assortment
    2U Adapter Bracket Assortment
    SKU: 2UKIT-101
    0% (0)
    $119.99
    Dell PowerEdge and PowerVault Adapter Brackets
    10 Bracket Assortment
    2U Adapter Bracket Assortment
  10. Detail view - VersaRail Alignment Kit
    Square Hole Alignment Washer and Hardware 8-Pack
    SKU: VERSARAIL-ALIGN-KIT
    0% (0)
    $19.99
    Prevents incorrect alignment
    of Dell Versa Rails
    Square Hole Alignment Washer and Hardware 8-Pack
View as Grid List

1-10 out of 10 results found

per page
Set Descending Direction

In case you were wondering

What is a center mount conversion kit?

Center mount conversion kits allow you to mount 4 post equipment on 2 post racks. When installing a server into a 2 post rack, a center mount conversion kit allows the weight of the server to be evenly distributed in the rack. These conversion kits are easy to install, customizable, and available in rack units ranging from 1U-7U. By using a center mount conversion kit, you will be able to convert the space you need in a rack and properly install your server.

What is a flush mount conversion kit?

Flush mount conversion kits are great for servers using 4 post rails to mount in a 2 post server rack. When the front space of your rack is limited, a flush mount conversion kit also provides an alternative to center mount conversion kits. These cantilever style mounting brackets provide 2 post racks with a similar appearance to 4 post racks. If you decide to use the flush mounting brackets, then you need to make sure that your 2 post rack is supported on the ground, which is typically done by bolting the rack to the floor.

How do I adjust the mounting depth of my server rack?

Adapter brackets are a great way to rack mount equipment that is too shallow or too deep in a server rack. To prevent rack mounting difficulties and limitations, adapter brackets are a highly configurable tool that allows you to extend or reduce the mounting depth of a server rack. By measuring the mounting depth of your server rack, you can determine which bracket size is needed for installation. For shallow depth racks, the adapter brackets can be used for rails that extend out past the uprights. If the rails that were supplied with your server are too shallow, then the adapter bracket will provide the extra space needed to mount the rails.

About RackSolutions

At RackSolutions, we want our passion for creative engineering and build quality to come across every time you work with our products. For 20 years, we’ve been building data center infrastructure for some of the largest tech companies in the world and bringing those products straight to consumers.

Contact us for questions or custom mounting needs.

+ Do adapter brackets increase or decrease mounting depth? 

Adapter brackets either increase and decrease the mounting depth of your rack. You can also stack brackets to cover more U-space. 

Additionally, the 0.59” deep brackets are effective at converting round holes to square holes.

+ Can 2 Post Conversion Brackets work with shelves?

2 Post conversion brackets work the same way with shelves as they do with rails. As long as you are using a 4 post shelf and it falls within the mounting constraints of the bracket, you will be able to mount your 4 post shelf on a 2 post rack.

+ Will these converters and adapters work with my rack? 

All converters and adapters that we offer work with round, square and threaded hole racks. If you’re concerned about more precise details, then contact our experts to make sure you get exactly what you need. 

"RackSolutions®", "RackSolutions.com" and "Innovation First" are registered trademarks of Innovation First, Inc. © Copyright 2022. Proudly serving the US, UK, EU, CA, and AU. All Rights Reserved. All other marks of others are property of their respective owners. Patents and/or Patents Pending: innovationfirst.com/patents